top of page

ENHANCE

Level 1 - Decontamination Detail

Level 1 - Decontamination Detail is for someone who wants their vehicle removed of all contaminates. This includes iron particles from brake pads, tar, glue and tree sap. The paintwork will have a really smooth feel. We can then apply a ceramic wax to protect the paintwork from water, dirt, grime, salt and uv rays. 

Delicious Detailing Process: 

Exterior

1. Wheels - Are sprayed with a non acidic based spray which removes iron particles (brake dust) and leave the alloy very smooth. They are then jet washed off, we then use a bucket of warm water with three different types of brushes. We use a small brush made of horse hair to clean harder to reach areas like the wheel nuts. We then clean the inner barrel with another brush, then use another to clean the tyre wall.

3. Two Bucket Method - To safely clean the paintwork without adding any additional swirls into the paintwork. This is done by using one bucket as the clean water with our ph neutral shampoo and the other as the rinse bucket to wash out any dirt that sits in the wash mitt. Our buckets also have grit guards in them so dirt will fall to the bottom of the bucket and can't be picked up by the wash mitt for the next pass. We will the jet wash the entire vehicle off.

5. Drying Process - We use ultra thick microfibre towels to remove all water from the vehicle and finish it off by using a blower machine which can create winds up to 100mph to blow any water sitting in mirrors, grills, lights, door handles and in door sills, to ensure there's no drips.

2. Snow Foam - The entire vehicle gets sprayed with snow foam we will then let that sit for a few minutes to break down some of the dirt and grime. We will use another detailing brush to to agitate the dirt in between car badges, grills, lights and any hard to reach areas. This will then be jet washed off. 

4. Decontamination Process - This is to remove a vehicle of any tar, tree sap and bird droppings. We use a tar and glue remover to remove all tar. Once the tar is removed we use an iron remover to remove all any iron particles stuck in the clear coat. Once removed we then clay bar over the whole vehicle for a nice smooth finish.

6. Glass - We will then clean down the outside/inside glass using a glass cleaner. (If you want the glass to be ceramic coated for ultimate protection we can apply this for you. Check out our Optional Extras above for pricing).

7. Tyre Gel - We will then finish off the outside tyre wall with our tyre gel for a slick wet finish. 

Interior 

Interior Process - Once we have finished the exterior of the vehicle we will then make a start on the interior. We will wipe down all surfaces including door sills and give it a once over with a hoover including the boot area. 

 

** For anyone wanting a deep interior detail check out our optional extras tab above for prices **

Choose Your Protection

Ceramic Wax

 

Great protection up to 3+ months, this is applied onto the vehicle and buffed off. This will protect your vehicle from water, dirt, salt, road grime and uv rays. When water is applied it will bead up and sheet straight off. Gloss levels are massively increased and gives a wet look to the car.

Pricing 

Level 1 Decontamination Detail

Small - £100

Medium - £130

Large - £160

Extra Large - £190

Ceramic Wax

Small - £40

Medium - £50

Large - £60

Extra Large - £70

bottom of page